ISO/TC135 Non-destructive testing，無損檢測

國際標準目錄

ISO/TC135  Non-destructive testing，無損檢測 ISO 2400:1972 Welds in steel -- Reference block for the calibration of equipment for ultrasonic examination 鋼焊縫  超聲檢測設備校準用參考試塊 ISO 3057:1998 Non-destructive testing -- Metallographic replica techniques of surface examination 無損檢測  表面檢測的金相復型技術 ISO 3058:1998 Non-destructive testing -- Aids to visual inspection -- Selection of low-power magnifiers 無損檢測  目視檢測輔助設備  低倍放大鏡的選擇 ISO 3059:2001 Non-destructive testing -- Penetrant testing and magnetic particle testing - Viewing conditions 無損檢測  滲透檢測和磁粉檢測  觀察條件 ISO 3452-1:2008 Non-destructive testing -- Penetrant testing -- Part 1: General principles 無損檢測  滲透檢測  第 1 部分：總則 ISO 3452-2:2006 Non-destructive testing -- Penetrant testing -- Part 2: Testing of penetrant materials 無損檢測  滲透檢測  第 2 部分：滲透材料的檢驗 ISO 3452-3:1998 Non-destructive testing -- Penetrant testing -- Part 3: Reference test blocks 無損檢測  滲透檢測  第 3 部分：參考試塊 ISO 3452-4:1998 Non-destructive testing -- Penetrant testing -- Part 4: Equipment 無損檢測  滲透檢測  第 4 部分：設備 ISO 3452-5:2008 Non-destructive testing -- Penetrant testing -- Part 5: Penetrant testing at temperatures higher than 50 degrees C 無損檢測  滲透檢測  第 5 部分：50 oC 以上的高溫滲透檢測 ISO 3452-6:2008 Non-destructive testing -- Penetrant testing -- Part 6: Penetrant testing at temperatures lower than 10 degrees C 無損檢測  滲透檢測  第 6 部分：10 oC 以下的低溫滲透檢測 ISO 3530:1979 Vacuum technology -- Mass-spectrometer-type leak-detector calibration 真空技術  質譜檢漏儀校準 ISO 5576:1997 Non-destructive testing -- Industrial X-ray and gamma-ray radiology -- Vocabulary 無損檢測  工業 X 射線和伽瑪射線照相  詞匯 ISO 5577:2000 Non-destructive testing -- Ultrasonic inspection -- Vocabulary 無損檢測  超聲檢測  詞匯 ISO 5579:1998 Non-destructive testing -- Radiographic examination of metallic materials by X- and gamma rays -- Basic rules 無損檢測  金屬材料 X 和伽瑪射線照相檢測  基本規則 ISO 5580:1985 Non-destructive testing -- Industrial radiographic illuminators -- Minimum requirements 無損檢測  工業射線照相觀片燈  最低要求 ISO 7963:2006 Non-destructive testing -- Ultrasonic testing --- Specification for calibration block No. 2 無損檢測  超聲檢測  2號校準試塊技術條件 ISO 9712:2005 Non-destructive testing -- Qualification and certification of personnel 無損檢測  人員資格鑒定與認證 ISO 9934-1:2001 Non-destructive testing -- Magnetic particle testing -- Part 1: General principles 無損檢測  磁粉檢測  第 1 部分：總則 ISO 9934-2:2002 Non-destructive testing -- Magnetic particle testing -- Part 2: Detection media 無損檢測  磁粉檢測  第 2 部分：檢測介質 ISO 9934-3:2002 Non-destructive testing -- Magnetic particle testing -- Part 3: Equipment 無損檢測  磁粉檢測  第 3 部分：設備 ISO 10375:1997 Non-destructive testing -- Ultrasonic inspection -- Characterization of search unit and sound field 無損檢測  超聲檢測  探頭及其聲場的表征 ISO 11537:1998 Non-destructive testing -- Thermal neutron radiographic testing -- General principles and basic rules 無損檢測  熱中子輻射照相檢測  總則和基本規則 ISO 11699-1:2008 Non-destructive testing -- Industrial radiographic film -- Part 1: Classification of film systems for industrial radiography 無損檢測  工業射線照相膠片  第 1 部分：工業射線照相膠片系統的分類 ISO 11699-2:1998 Non-destructive testing -- Industrial radiographic films -- Part 2: Control of film processing by means of reference values 無損檢測  工業射線照相膠片  第 2 部分：用參考值方法控制膠片處理 ISO 12706:2000 Non-destructive testing -- Terminology - Terms used in penetrant testing 無損檢測  術語  滲透檢測 ISO 12710:2002 Non-destructive testing -- Ultrasonic inspection -- Evaluating electronic characteristics of ultrasonic test instruments 無損檢測  超聲檢測  超聲檢測儀電特性的評定 ISO 12713:1998 Non-destructive testing -- Acoustic emission inspection -- Primary calibration of transducers 無損檢測  聲發射檢測  換能器的一級校準 ISO 12714:1999 Non-destructive testing -- Acoustic emission inspection -- Secondary calibration of acoustic emission sensors 無損檢測  聲發射檢測  聲發射傳感器的二級校準 ISO 12715:1999 Ultrasonic non-destructive testing -- Reference blocks and test procedures for the characterization of contact search unit beam profiles 超聲無損檢測  表征接觸式探頭聲束截面性能的參考試塊和測試規程 ISO 12716:2001 Non-destructive testing -- Acoustic emission inspection -- Vocabulary 無損檢測  聲發射檢測  詞匯 ISO 12718:2008 Non-destructive testing -- Eddy current testing -- Vocabulary 無損檢測  渦流檢測  詞匯 ISO 12721:2000 Non-destructive testing -- Thermal neutron radiographic testing -- Determination of beam L/D ratio 無損檢測  熱中子輻射照相檢測  中子束 L/D 的測定 ISO 14096-1:2005 Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control 無損檢測 射線照相膠片數字系統的質量鑒定 第 1 部分：定義、像質參數的定量測量、標準參考膠片和定量控制 ISO 14096-2:2005 Non-destructive testing -- Qualification of radiographic film digitisation systems -- Part 2: Minimum requirements 無損檢測 射線照相膠片數字系統的質量鑒定 第 2 部分：最低要求 ISO 15548-1:2008 Non-destructive testing -- Equipment for eddy current examination -- Part 1: Instrument characteristics and verification 無損檢測  渦流檢測設備  第1部分：儀器特性與驗證 ISO 15548-2:2008 Non-destructive testing -- Equipment for eddy current examination -- Part 2: Probe characteristics and verification 無損檢測  渦流檢測設備  第2部分：探頭特性與驗證 ISO 15548-3:2008 Non-destructive testing -- Equipment for eddy current examination -- Part 3: System characteristics and verification 無損檢測  渦流檢測設備  第3部分：系統特性與驗證 ISO 15549:2008 Non-destructive testing -- Eddy current testing -- General principles 無損檢測  渦流檢測  總則 ISO 15708-1:2002 Non-destructive testing -- Radiation methods -- Computed tomography -- Part 1: Principles 無損檢測  輻射方法  計算機層析成像  第 1 部分：原則 ISO 15708-2:2002 Non-destructive testing -- Radiation methods -- Computed tomography -- Part 2: Examination practices 無損檢測  輻射方法  計算機層析成像  第 2 部分：檢測方法 ISO/TS 18173:2005 Non-destructive testing -- General terms and definitions 無損檢測  通用術語和定義 ISO 18175:2004 Non-destructive testing -- Evaluating performance characteristics of ultrasonic pulse-echo testing systems without the use of electronic measurement instruments 無損檢測 不用電子測量?jī)x器評定超聲脈沖回波檢測系統工作特性 ISO 19232-1:2004 Non-destructive testing -- Image quality of radiographs -- Part 1: Image quality indicators (wire type) -- Determination of image quality value 無損檢測 射線照相底片像質 第1部分：線型像質計 像質指數的測定 ISO 19232-2:2004 Non-destructive testing -- Image quality of radiographs -- Part 2: Image quality indicators (step/hole type) -- Determination of image quality value 無損檢測 射線照相底片像質 第2部分：階梯孔型像質計 像質指數的測定 ISO 19232-3:2004 Non-destructive testing -- Image quality of radiographs -- Part 3: Image quality classes for ferrous metals 無損檢測 射線照相底片像質 第3部分：黑色金屬像質分類 ISO 19232-4:2004 Non-destructive testing -- Image quality of radiographs -- Part 4: Experimental evaluation of image quality values and image quality tables 無損檢測 射線照相底片像質 第4部分：像質指數和像質表的實驗評價 ISO 19232-5:2004 Non-destructive testing -- Image quality of radiographs -- Part 5: Image quality indicators (duplex wire type) -- Determination of image unsharpness value 無損檢測 射線照相底片像質 第5部分：雙線型像質計 圖像不清晰度的測定 ISO 20807:2004 Non-destructive testing -- Qualification of personnel for limited application of non-destructive testing 無損檢測 有限應用范圍的無損檢測人員資格鑒定 ISO/TS 21432:2005 Non-destructive testing -- Standard test method for determining residual stresses by neutron diffraction 無損檢測 測定殘余應力的中子衍射方法 ISO/TS 22809:2007 Non-destructive testing -- Discontinuities in specimens for use in qualification examinations 無損檢測  資格考試用試樣中的不連續 ISO/TR 25107:2006 Non-destructive testing -- Guidelines for NDT training syllabuses 無損檢測  NDT培訓課程指南 ISO/TR 25108:2006 Non-destructive testing -- Guidelines for NDT personnel training organizations 無損檢測  NDT人員培訓機構指南