CEN/TC 138 Non-destructive testing，無損檢測
CEN ISO/TS 21432:2005 Non-destructive testing - Standards test method for determining residual stresses by neutron diffraction (ISO 21432:2005)
無損檢測 測定殘余應力的中子衍射方法
CEN/TR 14748:2004 Non-destructive testing - Methodology for qualification of non-destructive tests
無損檢測 無損檢測的鑒定方法
CEN/TS 15053:2005 Non-destructive testing - Recommendations for discontinuities-types in test specimens for examination
無損檢測 推薦的考試用檢測試樣中的不連續類型
CR 13935:2000 Non-destructive testing - Generic NDE data format model
無損檢測 普通NDE數據格式模型
EN 12084:2001 Non-destructive testing - Eddy current testing - General principles and guidelines
EN 12084:2001/A1:2003 Non-destructive testing - Eddy current testing - General principles and guidelines
無損檢測 渦流檢測 總則與指南
EN 12223:1999 Non-destructive testing - Ultrasonic examination - Specification for calibration block No. 1
無損檢測 超聲檢測 1 號校準試塊規格
EN 12543-1:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 1: Scanning method
無損檢測 無損檢測用工業X射線系統焦點特性 第 1 部分：掃描方法
EN 12543-2:2008 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 2: Pinhole camera radiographic method
無損檢測 無損檢測用工業X射線系統焦點特性 第 2 部分：針孔射線照相方法
EN 12543-3:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 3: Slit camera radiographic method
無損檢測 無損檢測用工業X射線系統焦點特性 第 3 部分：狹縫射線照相方法
EN 12543-4:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 4: Edge method
無損檢測 無損檢測用工業X射線系統焦點特性 第 4 部分：邊緣方法
EN 12543-5:1999 Non-destructive testing - Characteristics of focal spots in industrial X-ray systems for use in non-destructive testing - Part 5: Measurement of the effective focal spot size of mini and micro focus X-ray tubes
無損檢測 無損檢測用工業X射線系統焦點特性 第 5 部分：小和微小焦點 X 射線管有效焦點尺寸的測量
EN 12544-1:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 1: Voltage divider method
無損檢測 X射線管電壓的測量與評價 第 1 部分：電壓分壓器方法
EN 12544-2:2000 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 2: Constancy check by the thick filter method
無損檢測 X射線管電壓的測量與評價 第 2 部分：用厚過濾器的恒定校驗方法
EN 12544-3:1999 Non-destructive testing - Measurement and evaluation of the X-ray tube voltage - Part 3: Spectrometric method
無損檢測 X射線管電壓的測量與評價 第 3 部分：頻譜方法
EN 12668-1:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
EN 12668-1:2000/A1:2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 1: Instruments
無損檢測 超聲檢測設備的性能與驗證 第 1 部分：儀器
EN 12668-2:2001 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
EN 12668-2:2001/A1:2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 2: Probes
無損檢測 超聲檢測設備的性能與驗證 第 2 部分：探頭
EN 12668-3:2000 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
EN 12668-3:2000/A1:2004 Non-destructive testing - Characterization and verification of ultrasonic examination equipment - Part 3: Combined equipment
無損檢測 超聲檢測設備的性能與驗證 第 3 部分：組合設備
EN 12679:1999 Non-destructive testing - Determination of the size of industrial radiographic sources - Radiographic method
無損檢測 工業射線照相源尺寸的測定 射線照相方法
EN 13018:2001 Non-destructive testing - Visual testing - General principles
EN 13018:2001/A1:2003 Non-destructive testing - Visual testing - General principles
無損檢測 目視檢測 總則
EN 13068-1:1999 Non-destructive testing - Radioscopic testing - Part 1: Quantitative measurement of imaging properties
無損檢測 射線透視檢測 第 1 部分：成像性能的定量測量
EN 13068-2:1999 Non-destructive testing - Radioscopic testing - Part 2: Check of long term stability of imaging devices
無損檢測 射線透視檢測 第 2 部分：成像裝置長期穩定性的校驗
EN 13068-3:2001 Non-destructive testing - Radioscopic testing - Part 3: General principles of radioscopic testing of metallic materials by X- and gamma rays
無損檢測 射線透視檢測 第 3 部分：金屬材料 X 和伽瑪射線透視檢測總則
EN 13184:2001 Non-destructive testing - Leak testing - Pressure change method
EN 13184:2001/A1:2003 Non-destructive testing - Leak testing - Pressure change method
無損檢測 泄漏檢測 變壓方法
EN 13185:2001 Non-destructive testing - Leak testing - Tracer gas method
EN 13185:2001/A1:2003 Non-destructive testing - Leak testing - Tracer gas method
無損檢測 泄漏檢測 示蹤氣體方法
EN 13192:2001 Non destructive testing - Leak testing - Calibration of reference leaks for gases
EN 13192:2001/AC:2003 Non destructive testing - Leak testing - Calibration of reference leaks for gases
無損檢測 泄漏檢測 參考泄漏氣體的校準
EN 1330-1:1998 Non destructive testing - Terminology - Part 1: List of general terms
無損檢測 術語 第 1 部分：一般術語
EN 1330-10:2003 Non-destructive testing - Terminology - Part 10: Terms used in visual testing
無損檢測 術語 第 10 部分：目視檢測
EN 1330-2:1998 Non destructive testing - Terminology - Part 2: Terms common to the non-destructive testing methods
無損檢測 術語 第 2 部分：無損檢測方法通用術語
EN 1330-3:1997 Non-destructive testing - Terminology - Part 3: Terms used in industrial radiographic testing
無損檢測 術語 第 3 部分：工業射線照相檢測
EN 1330-4:2000 Non destructive testing - Terminology - Part 4: Terms used in ultrasonic testing
無損檢測 術語 第 4 部分：超聲檢測
EN 1330-5:1998 Non-destructive testing - Terminology - Part 5: Terms used in Eddy current testing
無損檢測 術語 第 5 部分：渦流檢測
EN 1330-7:2005 Non-destructive testing - Terminology - Part 7: Terms used in magnetic particle testing
無損檢測 術語 第 7 部分：磁粉檢測
EN 1330-8:1998 Non-destructive testing - Terminology - Part 8: Terms used in leak tightness testing
無損檢測 術語 第 8 部分：泄漏檢測
EN 1330-9:2000 Non-destructive testing - Terminology - Part 9: Terms used in acoustic emission testing
無損檢測 術語 第 9 部分：聲發射檢測
EN 13477-1:2001 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 1: Equipment description
無損檢測 聲發射 設備性能 第 1 部分：設備概述
EN 13477-2:2001 Non-destructive testing - Acoustic emission - Equipment characterisation - Part 2: Verification of operating characteristic
無損檢測 聲發射 設備性能 第 2 部分：操作特性的驗證
EN 13554:2002 Non-destructive testing - Acoustic emission - General principles
EN 13554:2002/A1:2003 Non-destructive testing - Acoustic emission - General principles
無損檢測 聲發射 總則
EN 13625:2001 Non-destructive testing - Leak test - Guide to the selection of instrumentation for the measurement of gas leakage
無損檢測 泄漏檢測 氣體泄漏測量儀的選擇指南
EN 13860-1:2003 Non destructive testing - Eddy current examination - Equipment characteristics and verification - Part 1: Instrument characteristics and verification
無損檢測 渦流檢測 設備性能與驗證 第 1 部分：儀器性能與驗證
EN 13860-2:2003 Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 2: Probe characteristics and verification
無損檢測 渦流檢測 設備性能與驗證 第 2 部分：探頭性能與驗證
EN 13860-3:2003 Non-destructive testing - Eddy current examination - Equipment characteristics and verification - Part 3: System characteristics and verification
無損檢測 渦流檢測 設備性能與驗證 第 3 部分：系統性能與驗證
EN 13925-1:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous material - Part 1: General principles
無損檢測 多晶和非晶材料的X射線衍射 第 1 部分：總則
EN 13925-2:2003 Non-destructive testing - X-ray diffraction from polycrystalline and amorphous materials - Part 2: Procedures
無損檢測 多晶和非晶材料的X射線衍射 第 2 部分：工藝規程
EN 13925-3:2005 Non destructive testing - X ray diffraction from polycrystalline and amorphous materials - Part 3: Instruments
無損檢測 多晶和非晶材料的X射線衍射 第 3 部分：儀器
EN 13927:2003 Non-destructive testing - Visual testing - Equipment
無損檢測 目視檢測 設備
EN 14096-1:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 1: Definitions, quantitative measurements of image quality parameters, standard reference film and qualitative control
無損檢測 射線照相膠片數字系統的質量鑒定 第 1 部分：定義、像質參數的定量測量、標準參考膠片和定量控制
EN 14096-2:2003 Non-destructive testing - Qualification of radiographic film digitisation systems - Part 2: Minimum requirements
無損檢測 射線照相膠片數字系統的質量鑒定 第 2 部分：最低要求
EN 14127:2004 Non-destructive testing - Ultrasonic thickness measurement
無損檢測 超聲測厚
EN 14584:2005 Non-destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Planar location of AE sources
無損檢測 聲發射 金屬壓力設備調試期檢測 AE源的平面定位
EN 14784-1:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 1: Classification of systems
無損檢測 存儲式磷成像板工業計算機射線照相 第1 部分：系統分類
EN 14784-2:2005 Non-destructive testing - Industrial computed radiography with storage phosphor imaging plates - Part 2: General principles for testing of metallic materials using X-rays and gamma rays
無損檢測 存儲式磷成像板工業計算機射線照相 第2 部分：金屬材料X射線和伽瑪射線檢測總則
EN 1518:1998 Non-destructive testing - Leak testing - Characterization of mass spectrometer leak detectors
無損檢測 泄漏檢測 質譜檢漏儀的性能
EN 15305:2008 Non-destructive Testing - Test Method for Residual Stress analysis by X-ray Diffraction
EN 15317:2007 Non-destructive testing - Ultrasonic testing - Characterization and verification of ultrasonic thickness measuring equipment
EN 15495:2007 Non Destructive testing - Acoustic emission - Examination of metallic pressure equipment during proof testing - Zone location of AE sources EN 1593:1999 Non-destructive testing - Leak testing - Bubble emission techniques
EN 1593:1999/A1:2003 Non-destructive testing - Leak testing - Bubble emission techniques
無損檢測 泄漏檢測 氣泡技術
EN 1779:1999 Non-destructive testing - Leak testing - Criteria for method and technique selection
EN 1779:1999/A1:2003 Non-destructive testing - Leak testing - Criteria for method and technique selection
無損檢測 泄漏檢測 方法和技術選擇準則
EN 25580:1992 Non-destructive testing - Industrial radiographic illuminators - Minimum requirements (ISO 5580:1985)
無損檢測 工業射線照相觀片燈 最低要求
EN 27963:1992 Welds in steel - Calibration block No. 2 for ultrasonic examination of welds (ISO 7963:1985)
鋼焊縫 焊縫超聲檢測用 2 號校準試塊
EN 444:1994 Non-destructive testing - General principles for radiographic examination of metallic materials by X- and gamma-rays
無損檢測 金屬材料 X 和伽瑪射線照相檢測總則
EN 462-1:1994 Non-destructive testing - Image quality of radiographs - Part 1: Image quality indicators (wire type) - Determination of image quality value
無損檢測 射線照相底片像質 第 1 部分：線型像質計 像質值的測定
EN 462-2:1994 Non-destructive testing - Image quality of radiographs - Part 2: Image quality indicators (step/hole type) - Determination of image quality value
無損檢測 射線照相底片像質 第 2 部分：階梯孔型像質計 像質值的測定
EN 462-3:1996 Non-destructive testing - Image quality of radiographs - Part 3: Image quality classes for ferrous metals
無損檢測 射線照相底片像質 第 3 部分：黑色金屬像質級別
EN 462-4:1994 Non-destructive testing - Image quality of radiographs - Part 4: Experimental evaluation of image quality values and image quality tables
無損檢測 射線照相底片像質 第 4 部分：像質值和像質表的實驗評價
EN 462-5:1996 Non-destructive testing - Image quality of radiographs - Part 5: Image quality indicators (duplex wire type), determination of image unsharpness value
無損檢測 射線照相底片像質 第 5 部分：雙線型像質計 圖像不清晰度的測定
EN 473:2008 Non destructive testing - Qualification and certification of NDT personnel - General principles
無損檢測 NDT人員資格鑒定與認證 總則
EN 571-1:1997 Non destructive testing - Penetrant testing - Part 1: General principles
無損檢測 滲透檢測 第 1 部分：總則
EN 583-1:1998 Non-destructive testing - Ultrasonic examination - Part 1: General principles
EN 583-1:1998/A1:2003 Non-destructive testing - Ultrasonic examination - Part 1: General principles
無損檢測 超聲檢測 第 1 部分：總則
EN 583-2:2001 Non-destructive testing - Ultrasonic examination - Part 2: Sensitivity and range setting
無損檢測 超聲檢測 第 2 部分：靈敏度與測距調整
EN 583-3:1997 Non-destructive testing - Ultrasonic examination - Part 3: Transmission technique
無損檢測 超聲檢測 第 3 部分：穿透技術
EN 583-4:2002 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
EN 583-4:2002/A1:2003 Non-destructive testing - Ultrasonic examination - Part 4: Examination for discontinuities perpendicular to the surface
無損檢測 超聲檢測 第 4 部分：垂直于表面的不連續的檢測
EN 583-5:2000 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities
EN 583-5:2000/A1:2003 Non-destructive testing - Ultrasonic examination - Part 5: Characterization and sizing of discontinuities
無損檢測 超聲檢測 第 5 部分：不連續的定性與定量
EN 583-6:2008 Non-destructive testing - Ultrasonic examination - Part 6: Time-of-flight diffraction technique as a method for detection and sizing of discontinuities
無損檢測 超聲檢測 第 6 部分：用衍射聲時技術檢測和定量不連續
EN 584-1:1994 Non destructive testing - Industrial radiographic film - Part 1: Classification of film systems for industrial radiography
無損檢測 工業射線照相膠片 第 1 部分：工業射線照相膠片系統的分類
EN 584-2:1996 Non destructive testing - Industrial radiographic film - Part 2: Control of film processing by means of reference values
無損檢測 工業射線照相膠片 第 2 部分：用參考值方法控制膠片處理
EN ISO 12706:2000 Non-destructive testing - Terminology - Terms used in penetrant testing (ISO 12706:2000)
無損檢測 術語 滲透檢測
EN ISO 12718:2008 Non-destructive testing - Eddy current testing - Vocabulary (ISO 12718:2008)
EN ISO 15548-1:2008 Non-destructive testing - Equipment for eddy current examination - Part 1: Instrument characteristics and verification (ISO 15548-1:2008)
EN ISO 15548-2:2008 Non-destructive testing - Equipment for eddy current examination - Part 2: Probe characteristics and verification (ISO 15548-2:2008)
EN ISO 15548-3:2008 Non-destructive testing - Equipment for eddy current examination - Part 3: System characteristics and verification (ISO 15548-3:2008)
EN ISO 3059:2001 Non-destructive testing - Penetrant testing and magnetic particle testing - Viewing conditions (ISO 3059:2001)
無損檢測 滲透檢測和磁粉檢測 觀察條件
EN ISO 3452-2:2000 Non-destructive testing - Penetrant testing - Part 2: Testing of penetrant materials (ISO 3452-2:2000)
無損檢測 滲透檢測 第 2 部分：滲透材料的檢驗
EN ISO 3452-3:1998 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998)
EN ISO 3452-3:1998/AC:2001 Non-destructive testing - Penetrant testing - Part 3: Reference test blocks (ISO 3452-3:1998)
無損檢測 滲透檢測 第 3 部分：參考試塊
EN ISO 3452-4:1998 Non-destructive testing - Penetrant testing - Part 4: Equipment (ISO 3452-4:1998)
無損檢測 滲透檢測 第 4 部分：設備
EN ISO 3452-5:2008 Non-destructive testing - Penetrant testing - Part 5: Penetrant testing at temperatures higher than 50 degrees C (ISO 3452-5:2008)
EN ISO 3452-6:2008 Non-destructive testing - Penetrant testing - Part 6: Penetrant testing at temperatures
EN ISO 9934-1:2001 Non-destructive testing - Magnetic particle testing - Part 1: General principles (ISO 9934-1:2001)
EN ISO 9934-1:2001/A1:2003 Non-destructive testing - Magnetic particles testing - Part 1: General principles (ISO 9934-1:2003)
無損檢測 磁粉檢測 第 1 部分：總則
EN ISO 9934-2:2002 Non-destructive testing - Magnetic particle testing - Part 2: Detection media (ISO 9934-2:2002)
無損檢測 磁粉檢測 第 2 部分：檢測介質
EN ISO 9934-3:2002 Non-destructive testing - Magnetic particle testing - Part 3: Equipment (ISO 9934-3:2002)
無損檢測 磁粉檢測 第 3 部分：設備
| 
收藏
頂
踩
提升卡
置頂卡
沉默卡
喧囂卡
變色卡
千斤頂
顯身卡